PT-180A Fully automatic flap disc machine
This machine can produce flap discs in a fully automatic manner.Each step can be switched rapidly and the standby time of machine can be requded to the minimum.For different types of flap disc,most parameters can be stored on the control panel,and the parameters can be set as automatic generation,or the operator can make adjustment according to description.All materials can be conveniently loaded and unloaded.
This machine can produce flap discs in a fully automatic manner.Each step can be switched rapidly and the standby time of machine can be requded to the minimum.For different types of flap disc,most parameters can be stored on the control panel,and the parameters can be set as automatic generation,or the operator can make adjustment according to description.All materials can be conveniently loaded and unloaded.
Features:
● Fully automatic production
● High efficiency
● Saving labor cost
● Operator easy work
● Operator only to load materials and to remove the finished flap disc stacks
|
Stations of main plate |
8 |
|
Flap disc diameter |
100mm,115mm,125mm,150mm,180mm |
|
Flap disc center hole diameter |
16mm or 22mm |
|
Flap disc type |
Flat(Type T27) or Conical (Type T29) |
|
Efficiency |
600-800pcs/hour for 100mm flap disc(22x17x72flaps) |
|
Cutting blade speed |
up to 1600/minute,you can set the cutting speed on control panel |
|
Abrasive cloth grit can be cut |
36#-400# |
|
Backing pad material |
Fiber glass,plastic |
|
Backing pad diameter |
75mm-170mm |
|
Total power |
6kw,3phase,380v,50hz,different power condition can be customized |
|
Glue barrel |
280kg/barrel(big barrel,some hot area 150kg/barrel is more better choice),or30kg/barrel |
|
Maximum required pressure |
1.0Mpa |
|
Operating pressure |
0.4Mpa |
|
Air consumption |
100liters/minute |
|
Servo motor brand |
Panasonic |
|
Pneunamatic parts brand |
Airtac |
Cases:
